Category Archives: Parts
Going to get the dash rebuilt, here is the current condition.
Slowly managing to paint all of the interior in Top Coat. Probably another 6 hours to complete painting everything. Also ordered some new (second hand) badges for my boot off Yahoo Auctions via Jesse Streeter As you can see someone … Continue reading
Got new 5MGE cam shaft housings sent from the states. After cleaning them up with oven cleaner and degreaser they are now 90% clean. My previous ones and the cams in them had been deeply scored by grit and could … Continue reading
Progress is a bit slow at the moment. But I decided to paint the brake pedal / display mount. These thing must have come rusted from the factory.
Getting ready to finish reassembling the head. Checking the cam housing fitment. Painted and cleaned parts in the backyard. Rocker arms marinating in kerosene.
The MZ12 Multivision Computer is made up of 3 component boxes TW-D611T (86116-24010) which is responsible for multiplexing the video signal together using AN5315 and AN5352 chips. TW-D603T (86010‑24010) which is the television tuner box. TW-D604T (86112‑24010) which is the … Continue reading
Cleaned Timing Cover with new water pump, seals and hardware. To installed this weekend hopefully without over-torquing the gasket this time.
This is the initial result of painting the cam covers. It will need a little touch up to be perfect. First I cleaned the covers with a wire brush and then sanded them down. Then I prep-washed with 3M Wax … Continue reading
Got the engine back from the engineering shop today. Ready to be unwrapped, cleaned off and reassembled.